- Brand: OLEO-MAC
- Product Code: 8122-03
- Sku: 50329009E1A
- Availability: In Stock
Promotion - get gifts or a discount of up to 15% when buying an Oleo-Mac tool!
- < Cylinder volume - 50.9 cm3;
- Power - 3.5 hp (2.6 kW);
- Tire - OREGON 16” (40 cm);
- Lanzug - OREGON 0.325” x 0.058” (1.3 mm);
- Carburetor - Walbro;
- Primer - yes;
- Fuel tank volume - 0.55 l;
- Oil tank volume - 0.26 l ;
- Chain tensioner - side;
- Air filter - nylon;
- Air filter cover - keyless entry (wing nut);
- < li>Crankcase - aluminum;
- Weight (without bar and chain) - 5.2 kg.
The new series of chain saws Oleo-Mac from EMAK for domestic use exclusively design, best-in-class performance and outstanding features. >
This model is very powerful, it has an engine as much as 3.5 hp Chainsaw class GSH 56 economy, but it showed its best side. Like all products from the famous Italian manufacturer, it has a high level of performance and wear resistance, but is suitable for private use. For constant work to the limit, you should consider Oleo Mac chainsaws, priceswhich are slightly higher.
Ergonomic fuel the tank of the GSH 56 is separated from the hull, thus maximizing safety as the fuel will not ignite from excessive engine heat. and air filter. The large flywheel diameter ensures smoother engine operation, thus optimizing engine cooling, even at abnormally high temperatures. And the adjustable aluminum alloy oil pump makes the operator's job easier by varying the oil flow rate depending on the combination of chain and bar. Zero oil flow to the engine during idling, guarantees lower environmental impact and lower consumption.
>buy an oleo mac chainsaw? Then get in touch with our consultants! They will not only complete your order and delivery to the specified address, but will also help you find the best model, in your case, depending on the tasks and working conditions. class="MsoNormal">
Aluminum crankcase. Lightweight and reliable.
Nickel plated cylinder
The majestic 100mm flywheel with new geometry is designed to provide smoother engine operation, reliable and constant cooling even at high ambient temperatures.
Forged three-piece crankshaft and forged connecting rod, as well as protected bearings.
Piston with two piston rings.
Reliable Walbro carburetor.
Three-mass centrifugal clutch and 7-tooth chain sprocket.
Aluminum adjustable oil pump. Simplifies the task of the operator to select the level of oil supply based on the tasks performed, the size of the bar / chain. Zero oil supply at idle ensures low oil consumption and also reduces environmental impact.
The fuel tank is physically separated from the crankcase, which reduces the heating of the fuel mixture from a heated engine.
Auto Shutter - Requires one click to start. Primer for pumping the fuel mixture directly into the carburetor - this will allow you to quickly start the dust in cold conditions, after refueling and after long periods of storage. catalog/photo/avtozaslonka-i-primer.jpg">
Reinforced muffler guarantees reduced noise level even when operating at maximum speed.
There are no reviews for this product.